Electrical panel upgrades in Calgary: four before-and-after panels, from $2,800

Before and after a panel upgrade by Koop Electrical in a Calgary basement: the old panel at the end of a tangle of cables across the ceiling, and the new panel with the cables re-routed and a Koop label on the door

February 2025 to September 2026 · Residential · Panel upgrades · Calgary

Four Calgary homes, four electrical panel upgrades by Koop Electrical between February 2025 and September 2026. In each one an old panel came out, a new breaker panel went in, the panel area was cleaned up, every circuit in the house was traced and labelled, and the work was inspected under a City of Calgary permit. Panel upgrades with Koop Electrical start at $2,800.

At a glance

  • Client: Five homeowners across Calgary; Maple Ridge, Parkland, Willow Park, Acadia, and Triwood

  • Job type: Electrical panel replacement upgraded service 100-200amps

  • Dates: February 2025; January 2026; August 2026; September 2026

  • Scope, each job: New panel and main breaker; new breakers, with AFCI and GFCI protection where the code now requires it; every cable re-terminated and dressed; bonding checked; typed circuit directory; City of Calgary electrical permit and inspection; ENMAX disconnect where the meter had to be pulled

  • Cost: From $2,800 to $5500

Why people replace a panel

Four reasons come up over and over. There is no room for another breaker, and the EV charger, hot tub or suite needs one. The panel is a type insurers flag: Federal Pioneer Stab-lok, Sylvania or Zinsco, a fuse box, or a 60 amp service. Breakers trip for no reason, or a breaker never trips when it should. Or the house is being renovated and the panel is the last 1970s thing left in it. Some insurers charge more for a home with one of the flagged panels, and some will not cover it until it is replaced; a new panel with a permit and an inspection on file ends that conversation. Ask your broker what yours says.

The four jobs

  • Job 1 (February 2025). Before: A grey Federal Pioneer Stab-lok panel in a basement utility corner, cables entering from every direction, the cable-TV splitter hanging below it. After: New white panel on a fresh backboard, cables dressed into it, the low-voltage gear moved onto its own board.

  • Job 2 (January 2026). Before: An old grey panel inside a hallway closet, open splices on the board beside it and a faded warning label. After: New panel in the same closet, the board cleaned up, nothing exposed.

  • Job 3 (August 2026). Before: A grey panel with the original hand-written circuit sheet taped inside the door, a junction box of splices above. After: New panel, the splices in proper boxes, a typed directory.

  • Job 4 (September 2026). Before: A panel at the end of a tangle of cables running across the basement ceiling. After: New panel with the cables re-routed and clipped, a Koop Electrical label on the door.

Before and after: an old Federal Pioneer Stab-lok electrical panel in a Calgary basement, and the new white panel on a fresh backboard installed by Koop Electrical
Before and after: an old grey electrical panel in a hallway closet with exposed splices, and the new panel installed by Koop Electrical in the same closet, Calgary
Before and after: an old electrical panel with a hand-written circuit sheet inside the door, and the new panel with a typed circuit directory installed by Koop Electrical, Calgary

What a Koop panel upgrade includes

  • A new panel and main breaker sized to your service, with a main you can actually turn off.

  • New breakers, including AFCI and GFCI breakers where the current code requires them.

  • Every cable re-terminated and dressed, splices moved into proper boxes, the backboard replaced if it needs it.

  • Bonding and grounding checked and brought up to code.

  • Every circuit in the house traced and labelled in a typed directory on the door, so the next person can find the bedroom breaker without flipping ten of them.

  • The City of Calgary electrical permit and the inspection, and the ENMAX disconnect if the meter has to come off.

The result

Four houses with a panel nobody has to apologize for, a directory that is right, and an inspection sticker inside the door. Peace of mind is the phrase the owners use.

Panel upgrades in Calgary

A residential panel upgrade with Koop Electrical costs $2,800 to $4,500, depending on amperage and where the panel sits. Upgrading from 100 amps to 200 amps is our most common request, usually driven by an EV charger, a suite or a renovation; where the utility service itself has to grow, see our Dover project for what that involves. Estimates are free: call 403-702-6053 or use the contact form.

Get a free estimate

Related projects: 200 amp service upgrade in Dover · EV energy management system in Mahogany · How much does a panel upgrade cost in Calgary? (FAQ)

This job is one of our panel and service upgrades in Calgary. See every service with pricing on our Services page →

Previous
Previous

Ford Lightning charger in Chaparral: a 50 amp EV plug with energy management